RP5-GM31

An all-in-one radio replacement and SWC interface, the innovative RadioPRO5 comes
pre-loaded with OnStar retention, amplifier retention, SWC software, navigation-based output signals, and other features that save time and money during installation.

• Compatible with all factory systems amplifier or nonamplified 
• Retains factory Bose and premium Bose audio systems
• USB updatable 
• Chime through CMX module or Y91 / UQA amplifier 
• Retained accessory power output (RAP)
• Improved accessory output circuit (10A)
• Reverse wire output
• VSS (Vehicle Speed Sense) output
• Illumination output and parking brake output
• Retains OnStar® functions when the factory radio is replaced
• Retains steering wheel controls
• Retains rear seat audio controls
• Retains all warning chimes, including back-up sensors/park assist
• Retains reverse camera signal
• Retention of rear-seat entertainment requires GMRVD
• Includes antenna adapter

Compatibility Notes:

• 2012-2014 Avalanche, Sierra, Silverado Suburban, Tahoe & Yukon: vehicles equipped with a navigation radio are not compatible. These vehicles must use the RP5-GM32

 

• 2014+ Silverado and Sierra: Only compatible with 2500 & 3500 series trucks with non-navigation radios. 1500 series must use the RP5-GM51. 2500 & 3500 series trucks with navigation radios must use the RP5-GM32

• In Premium Amplified Systems there will be no fading capability of the aftermarket stereo.

 

• Chevrolet Express vans & GMC Savannah vans equipped with diesel engines are not compatible

 

• In order to retain the factory XM tuner the aftermarket head unit MUST be equipped with an auxiliary input

 

• In order to retain the factory XM tuner, the vehicle must be equipped with steering wheel controls and a driver information center

• Sony Bluetooth SWC commands are only supported with revision 1.6.6.14 or higher

 

• Does not retain escalating tones of parking sensor proximity

 

• Does not retain lane departure or forward collision warning tones